Front Shock Removal; Rear Shock Removal; Front Control Arm - 50Cc; Control Arm Exploded View - Polaris PREDATOR 50 2009 Manual

BODY / SUSPENSION / STEERING

Front Shock Removal

1. Elevate front end of the ATV off the ground to remove
shock spring tension.
CAUTION
Severe injury could occur if machine tips or falls.
2. Remove the upper shock mounting bolt from the frame and
the lower shock mounting bolt from the front suspension
arm / A-arm.
Predator 50
Shown
3. Replace the shock or spring as required.
4. Install shock as shown in Figure 5.8.
5. Torque shock mounting bolts to specification.
Front Shock Mounting Bolt Torque:
25 ft. lbs. (34 Nm)

Rear Shock Removal

1. Elevate rear end of the ATV off the ground to remove
shock spring tension.
CAUTION
Severe injury could occur if machine tips or falls.
5.12
Figure 5.8
= T
2. Remove the upper shock mounting bolt from the frame and
the lower shock mounting bolt from the swing arm.
Predator 50
Shown
3. Replace the shock, spring or adjuster cam as required
4. Install the shock as shown in Figure 5.9.
5. Torque shock mounting bolts to specification.
Rear Shock Mounting Bolt Torque:
36 ft. lbs. (49 Nm)

FRONT CONTROL ARM - 50CC

Control Arm Exploded View

Figure 5.9
= T