Transmission And Final Drive; Transmission Lubrication; Transmission Lubricant Level; Transmission Lubricant Change - Polaris PREDATOR 50 2009 Manual

2. Use a non-synthetic brush to clean the arrestor screen. A
synthetic brush may melt if components are warm. If
necessary, blow debris from the screen with compressed
air.
3. Inspect the screen for wear and damage. Replace if
necessary.
4. Reinstall the arrestor.
5. Torque the screws to 7 ft. lbs. (9.5 Nm).

TRANSMISSION AND FINAL DRIVE

Transmission Lubrication

The transmission lubricant level should be checked and changed
in accordance with the maintenance schedule.
Remember to:
• Verify the vehicle is level before proceeding.
• Verify the vent hose is routed properly and is not
obstructed.
• Follow instructions to check / change transmission
fluid.
TRANSMISSION SPECIFICATIONS
Recommended Lubricant:
Polaris (AGL)
ATV Gearcase Lubricant:
Quart - (PN 2873602)
Capacity:
11.8 oz. (350 ml)
or bottom of fill hole threads
Drain Plug Torque:
14 ft. lbs. (19 Nm)

Transmission Lubricant Level

The gear case fill plug is located on the side of the gear case on
the right side of the ATV. Maintain the lubricant level at the
bottom of the fill plug hole threads.uld be checked monthly and
changed annually.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
Fill Plug
Drain Plug
3. View the lubricant level through the fill hole.
4. If the level is low, add the recommended lubricant.
5. Reinstall the fill plug.

Transmission Lubricant Change

1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. Place a drain pan beneath the transmission.
4. Remove the drain plug and allow the lubricant to drain
completely.
DO NOT REMOVE
Shifter Detent
Drain Plug
MAINTENANCE
DO NOT REMOVE
CVT Drain Plug
2.19
2