Front A-Arm - 90Cc; A-Arm Exploded View; A-Arm Replacement - Polaris PREDATOR 50 2009 Manual

BODY / SUSPENSION / STEERING

FRONT A-ARM - 90CC

A-arm Exploded View

Upper Cap
Spindle Bushing
Grease Fitting
Lower
Spindle Bushing
Right Spindle

A-arm Replacement

1. Elevate front end of ATV off the ground far enough to
remove the wheel.
CAUTION
Severe injury could occur if machine tips or falls.
2. Remove the dust cap and cotter pin.
3. Remove wheel nut and remove wheel and hub as an
assembly.
5.14
Right A-arm
Bushings
(8) Total
25 ft. lbs.
(34 Nm)
Grease Fittings
Left A-arm
Grease Fitting
4. Remove the cotter pin from the upper spindle castle nut and
remove the nut.
5. Slide the spindle assembly out from the end of the control
arm.
Grease Fittings
Cap
Spindle Bushing
Spindle Bushing
Left Spindle
Upper
Lower