Tie Rod; Removal / Adjustment - Polaris PREDATOR 50 2009 Manual

3. Remove the inner tie-rod nuts.
4. Remove the steering post nut.
Steering Post Nut
5. Remove the (2) nuts retaining the bearing plate.
6. Carefully remove the steering post from the ATV.
7. To reinstall, reverse steps 1 - 6. Torque all fasteners to
specification. See torque specifications listed in the
exploded view.
Tie Rod Nuts
Bearing Plate Nuts
BODY / SUSPENSION / STEERING

TIE ROD

Removal / Adjustment

Steering tie rods can be replaced by removing the rod-end castle
nut at the steering post and spindle.
Tighten inner and outer tie rod bolts and jam nuts to
specification
NOTE: See Chapter 2 for Toe Alignment procedure.
Inner / Outer Tie Rod Nut Torque
25 ft. lbs. (34 Nm)
Tie Rod Jam Nut Torque
12-14 ft. lbs. (17-19 Nm)
5
5.19