Front Cab Removal - Polaris PREDATOR 50 2009 Manual

Front Cab Removal

1. Remove the (3) bolts and (2) screws retaining the front
bumper to the ATV. The (2) screws are on the backside of
the front bumper and attach the bumper to the front cab.
2. Disconnect the daytime running lights and remove the front
bumper.
3. Remove all (8) fasteners retaining the front rack and
remove the rack from the ATV.
4. Remove the (2) lower bolts retaining the front rack support
and remove the support.
BODY / SUSPENSION / STEERING
5. Remove the (2) screw inserts attaching the front cab to the
front cab cover under the handle bar pod.
6. Disengage the locking tabs attaching the front cab cover to
the front cab and remove the cover.
7. Remove the fuel cap and carefully lift up and pull the front
cab towards the rear of the ATV to completely remove it.
5
5.9