ENGINE / TRANSMISSION
Oil Pump Removal
NOTE: Oil pump is not a serviceable assembly.
NOTE: The CVT system, starter motor, starter drive,
flywheel, stator, oil pump and transmission can be
serviced with the engine in the frame.
1.
Remove stator.
2.
Remove oil pump body screws (C).
3.
Remove oil pump assembly. Inspect surface of crankcase
for scratches or wear. Replace crankcase if damaged or
deeply grooved.
3.26
C
4.
Remove body screw and plate.
5.
Inspect gears and drive pins (D) on pump shaft for wear or
damage. Replace pump assembly if parts are worn,
scratched or otherwise damaged.
6.
If parts pass inspection, clean and lubricate the pump parts
with clean engine oil.
7.
Assemble pump and tighten screw securely.
8.
Turn pump gear by hand to check for smooth operation.
Replace pump or re-clean parts if any roughness or binding
is evident.
D