Pressure 1; Disengage Differential; Measured Rotation Rate; Measured Pwm Encoder Change Rate - Raven DirecSteer Calibration And Operation Manual

Pressure 1

For single and dual pressure disengage types, the pressure monitored by the first pressure
transducer is shown.
Pressure 2
For dual pressure disengage types, the pressure monitored by the second pressure
transducer is shown.

Disengage Differential

For dual pressure disengage types, this field displays the differential between the two
transducers.

Measured Rotation Rate

This rate displays for steering wheel encoder disengage types and displays the rate of
steering in degrees per second.
When connected with a DirecSteer unit, this display provides a calculated, non-dimenisional
rotation rate through the DirecSteer unit.

Measured PWM Encoder Change Rate

This rate displays for steering wheel encoder disengage types. This field displays the change
in steering position in percent per second.

Encoder Rate

Displays the speed at which the steering wheel is turning.

Disengage Threshold

Set the minimum value which the sensor must detect to disengage auto-steering as the
steering wheel is turned manually. Adjust the value so that the disengage status changes to
red when the steering when the steering disengage switch is engaged. When the steering
input stops, this status should return to green, which indicates that auto-steer may be
engaged. Adjust the threshold to minimize the delay between detecting steering input and
the status toggling between red and green.

Reset Calibrated Gains

Note: Some pages and options may differ based upon how the machine or implement is
configured.
System Settings
93