Performance Monitor; Online Performance - Raven DirecSteer Calibration And Operation Manual

Chapter 7
Code ID
No SGC (steer-
ing guidance
523908 .31
controller) detec-
ted.
SGC (steering
guidance con-
523916 .13
troller) software
compatibility.
Logic LDO (lin-
583879 .0 ear and low drop
out) power error.

Performance Monitor

The steering guidance controller (SGC) offers auto-steering performance metrics.
1. From the auto-steer Home page, select the Performance
2. Each Performance page offers system metrics. These pages allow the operator to reset
data collection for diagnostic purposes or to collect metrics for a specific period of
time.

Online Performance

The Online Performance page provides average and 95% metrics for auto-steer system
performance.
172
Description
3. If the machine steering valve offers LED status
The steering control unit (SCU) does not detect a
navigation controller on the CANbus.
1. Ensure cable connections are properly seated.
2. Inspect for damage to cables or cable con-
3. Check CANbus communication.
The current steering guidance controller (SGC)
software is out of date. Update the SGC and
HDU software.
The logic power supplied to the ECU is out of range. If
the error persists, contact your local Raven dealer or
the Raven Technical Service team.
Recommended Actions
lights, review the machine operator manual for
additional troubleshooting procedures.
nections including bent or pushed in pins.
button.