Pressure Transducers - Raven Autoboom Installation Manual

If the installer has a general knowledge of the machine's hydraulic system, the
Autoboom hydraulics are relatively simple to install. This section will cover the
valve configuration and mounting, and also the hydraulic hose installation. Be
sure to follow the safety guidelines, as hydraulic systems are under pressure even
when the machine is turned off.

Pressure Transducers

G1 Systems
1. Install a pressure transducer into the G1 or G2 Port. If you want the
transducer in Port G2, you must move the plug from the G2 Port to the
G1 Port.
2. Install a pressure transducer into the G3 or G4 Port.
G2 Systems
1. Install a pressure transducer into the G1 or G2 Port.
2. Install a pressure transducer into the G Aux or PT Aux Port.
Manual # 016-0130-006 Rev A 02/06
C
H A P T E R
H
Y D R A U L I C S
1 5