Table of Contents
Advertisement
Chapter 4:
External Device Settings
The following sections offer information on setting up external devices or displays to utilize
GNSS messages from the auto-steer system.
Viper® 4 and Viper® 4+
To configure Viper® 4 or Viper® 4+ to use GNSS messages from the auto-steer system:
Note:
If RS1™ is replacing a steering system, the old steering ECU must be unplugged and a
Serial Redetection performed before continuing. Refer to the
assistance.
1. From the ROS home screen, select the Edit Machine icon.
External Device Settings
Serial Device Detection
topic for
45
Advertisement
Table of Contents
