Table of Contents
Advertisement
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
8.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-663) on the 90° end of the installed tee
9.
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the
tee fitting to achieve the connection.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port B of the SmarTrax
10.
valve.
Note:
It may be necessary to install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the
fitting installed in Port B of the SmarTrax valve to achieve the connection.
Install the Pressure and Tank Hoses
Pressure Hose Installed
FIGURE 6.
Pressure Port
Disconnect the machine's pressure hose from the steering orbital.
1.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) in the open port of the steering
2.
orbital.
Connect the machine's pressure hose to the opposite end of the installed tee fitting.
3.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-664) on the 90° end of the installed tee
4.
fitting.
Note:
It may be necessary to install a -8 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the
tee fitting to achieve the connection.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax
5.
valve.
Note:
It may be necessary to install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the
fitting installed in Port P of the SmarTrax valve to achieve the connection.
Manual No. 016-4001-127 Rev. B
Hydraulic System Installation
13
Advertisement
Table of Contents
