Table of Contents
Advertisement
Chapter 6
Wheel Base (Machine Steering Only)
The Wheel Base is calculated by measuring from the center of the front tire to the center of
the rear tire.
Note:
The Wheel Base is calculated by measuring from the center of the front tire to the
center of the rear tire on both sides of the machine. Add these measurements together and
then divide by two to get the average Wheel Base value.
Steering Setup Tab
Note:
Some pages and options may differ based upon how the machine or implement is
configured.
Access the Steering Setup tab to adjust or tune the auto-steer system after the initial setup
and calibration. This tab offers the operator access to settings and options to help adjust
how the system responds to various steering inputs. To access the Steering Setup options,
settings, and features:
1. From the auto-steer Home page, select the Tools
74
button.
Advertisement
Table of Contents
