Chapter 5 Pressure Transducer Installation; Pressure Transducer Installation - Raven Hawkeye Installation Manual

CHAPTER
5

PRESSURE TRANSDUCER INSTALLATION

NOTE: Apply thread sealer to male threads before installation.
1. Connect the provided pressure transducer, poly tee, poly elbow, and poly pipe nipples.
FIGURE 1. Transducer Assembly
Pipe Nipples
2. Locate the machine's pressure transducer on the center rack.
FIGURE 2. Pressure Transducer
Pressure
Transducer
3. Disconnect the machine's cable from the transducer.
P/N 016-0171-640 Rev. A
P RESSURE TRANSDUCER
C H A P T E R 5
INSTALLATION
Poly Elbow
Pressure
Transducer
Poly Tee
21