Table of Contents
Advertisement
Chapter 6:
System Settings
The following sections provide a brief orientation and description of the settings found in
the guidance and steering UT.
Note:
Some pages and options may differ based upon how the machine or implement is
configured.
Machine Settings Tab
The Machine Settings tab provides access to machine tuneset profile settings and options
and antenna offset values. Additionally, options for implement steering will be available
when the ECU is configured for implement steering applications. To access the Machine
Settings tab:
Steering Setup Tab
The Steering Setup tab displays the current steering partner detected for auto-steering
operations. This tab also provides access to the settings which allow the operator to fine-
tune the auto-steering system. To access the Steering Setup tab:
Note:
The Steering Setup tab is not available if the 'GNSS Only Calibration' option was
selected during the tuneset calibration wizard.
GPS (GNSS) Setup Tab
The GPS Setup tab provides access to GNSS options and features such as differential
correction types and terrain compensation for auto-steering operation. To access the GPS
Setup tab:
Feature Unlocks Tab
The Raven auto-steering system may offer optional features which are not enabled from the
factory. These features require an unlock code to enable or activate these features or
services. To review or enter unlock codes for optional features:
Note:
Contact a local Raven dealer for additional information on available unlock codes.
System Settings
65
Advertisement
Table of Contents
