Table of Contents
Advertisement
Chapter 4
Release Tool
STC-06
STC-08
Install the Pressure, Tank, Left, and Right
Hoses
Locate the steering orbitrol underneath the front of the cab.
1.
Using an STC fitting removal tool or flat screwdriver, disconnect the original pressure, tank, left, and right
2.
lines from the steering orbitrol.
Note:
When disconnecting the hoses from the machine, label the hoses in order to avoid any confusion
when reconnecting the hoses.
Machine's Steering Orbitrol
FIGURE 1.
12
NOTICE
This machine is equipped with Aeroquip STC®
fittings which require two STC Quick release
tools in order to remove the hydraulic fittings.A
flat screwdriver may also be used to remove
fittings, but may make removal difficult. These
tools can be purchased from Aeroquip or Raven
Industries.
Aeroquip P/N
FF90213-06
FF90213-08
CaseIH MX 210, 230, 255, and 285 SmarTrax Installation Manual
Raven P/N
333-0012-152
333-0012-153
Advertisement
Table of Contents
