Install The Pressure And Tank Hoses - Raven SmarTrax Installation Manual
For mccormick mfwd mtx120-155, xtx 145-215, and ttx 190-230
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Chapter 3
Connect the straight end of the installed hydraulic hose to the open load sense port of the steering orbital.
3.
LSPV Connection
FIGURE 19.
Install a -4 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-023) on the fitting installed in Port LSPV of the
4.
SmarTrax valve.
Connect the machine's load sense hose that was disconnected in step 1 to the fitting installed in Port LSPV
5.
of the SmarTrax valve.
Install the Pressure and Tank Hoses
Machine's Pressure and Tank Hoses on the Steering Orbital
FIGURE 20.
Tank
Pressure
Disconnect the machine's pressure and tank hoses from the steering orbital, labeling them as they are
1.
removed to ensure they are reconnected to the correct steering orbital port.
20
McCormick MFWD MTX120-155, XTX145-215, and TTX190-230 Series SmarTrax™ Installation Manual
Advertisement
Table of Contents
