Configuring Source Port; Mac Table; Adding Mac Table - Dahua PFS4307-4ET-96 Web Operation Manual

Parameter
Authentication type
Authentication password
Encryption type
Encryption password
Read/Write username

4.7 Configuring Source Port

Step 1 Select Network Settings > Source Port Config.
Step 2 Set TCP port, HTTP port and HTTPS port.
The range of the TCP port is from 1025 to 65534.
Step 3 Click Save.

4.8 MAC Table

MAC (Media Access Control) Table records the relationship between the MAC address and the port,
and the information including the VLAN that the port belongs to. When the device is forwarding the
packet, it queries in the MAC address table for the destination MAC address of the packet. If the
destination MAC address of the packet is contained in the MAC address table, the packet is
forwarded through the port in the table directly. And if the destination MAC address of the packet is
not contained in the MAC address table, the device adopts broadcasting to forward the packet to all
the ports except the receiving port in VLAN.

4.8.1 Adding MAC Table

You can bind the MAC address to the port on certain VLAN.
Procedure
Step 1 Select Network Settings > MAC Table > MAC Table.
Step 2 Click Add.
Step 3 Set the MAC address, VLAN, and Port.
For example, bind the MAC address 00:00:00:00:00:01 to the port 3 in VLAN 2.
Step 4 Click OK.
Description
Set authentication mode when the security level is
Authentication no encryption or Authentication and
encryption. The authentication mode includes MD5 and SHA.
Set authentication password.
Set encryption mode when the authentication mode is
Authentication and encryption.
Set the encryption password when the authentication mode is
Authentication and encryption.
Set read and write user.
19