Mac Table - Dahua PFS4218-16GT-190 Web Config Manual

Step 2 Select PD Class or LLDP-MED for Reserved Power. By default, PD Class is selected.
Step 3 Set the Primary Power Supply and the System Power Reserved in PoE Power Supply
Configuration.
Step 4 Select ON or OFF for PoE Mode from the drop-down list.
Step 5 Click Save.

4.1.10 MAC Table

MAC (Media Access Control) Table records the relationship between the MAC address and the
port, and the information including the VLAN that the port belongs to. When the device is
forwarding the packet, it queries in the MAC address table for the destination MAC address of
the packet. If the destination MAC address of the packet is contained in the MAC address table,
the packet is forwarded through the port in the table directly. And if the destination MAC
address of the packet is not contained in the MAC address table, the device adopts
broadcasting to forward the packet to all the ports except the receiving port in VLAN.
You can set aging configuration, MAC table learning, and static MAC table configuration.
Step 1 Select Advanced > Configuration > MAC Table.
The MAC Address Table Configuration interface is displayed. See Figure 4-74.
Step 2 Select Disable Automatic Aging, and set the Aging Time. By default, it is 300
seconds.
Step 3 Select Auto or Disable to enable or disable MAC table learning.
Step 4 Bind the MAC address to the port in the certain VLAN. For example, bind the MAC
address 00-00-00-00-00-01 to the port 8 in VLAN 2.
1) Click Add New Static Entry in Static MAC Table Configuration.
A new record is added. See Figure 4-75.
Figure 4-74 MAC address table configuration
Advanced Settings 55