Table of Contents
Advertisement
•
If removing a drive from the front drive cage and the security bezel is installed, remove the bezel (Remove the bezel).
•
If removing a drive from the internal drive cage, extend the front and internal drive cages out of the chassis (Extend
the front drive cages out of the chassis).
•
If removing a drive from a rear drive cage, access the product rear panel.
3. Depending on the type of drive in the cage, do one of the following:
•
Remove an LFF drive:
a. Determine the status of the drive from the low profile LFF drive LEDs (Low-profile LFF drive LED definitions).
b. Wait until the Online/Activity LED stops flashing.
c. To open the release lever, press the latch.
d. Pull the release lever to disengage the drive from the backplane, and then slide the drive out of the bay.
•
Remove an SFF drive:
a. Determine the status of the drive from the SFF LEDs (SFF drive components and LEDs).
b. Wait until the icon in the Do Not Remove button stops flashing and is no longer illuminated.
c. Press the Do Not Remove button to open the release lever.
d. Pull the release lever to disengage the drive from the backplane, and then slide the drive out of the bay.
•
Remove an NVMe drive (rear drive cage only):
Removal and replacement procedures
50
Advertisement
Table of Contents
