Table of Contents
Advertisement
Item
Description
1
Release lever
2
Activity ring
3
Do Not Remove LED
4
Request to Remove NVMe Drive button
1
Do not remove an NVMe SSD from the drive bay while the Do Not Remove button LED is flashing. The Do Not Remove button
LED flashes to indicate the device is still in use. Removal of the NVMe SSD before the device has completed and ceased signal/
traffic flow can cause loss of data.
Smart Carrier NVMe (SCN) drive LED definitions
The NVMe drive is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing the device and bus
to complete and cease the signal/traffic flow.
CAUTION: Do not remove an NVMe drive from the drive bay while the Do not remove LED is flashing. The Do not
remove LED flashes to indicate that the device is still in use. Removing the NVMe drive before the device has completed
and ceased signal/traffic flow can cause loss of data.
Item
LED
1
Locate
2
Activity
ring
3
Drive
status
1
Status
Definition
Solid blue
The drive is being identified by a host application.
Flashing blue
The drive carrier firmware is being updated or requires an update.
Rotating green
Drive activity
Off
No drive activity
Solid green
The drive is a member of one or more logical drives.
Table Continued
Component identification
165
Advertisement
Table of Contents
