Item
Component
1
Locate
2
uFF drive ejection latch
3
Do not remove LED
4
Drive status LED
5
Adapter ejection release latch and
handle
Drive cage identification
Description
•
Off—Normal
•
Solid blue—The drive is being identified by a host application.
•
Flashing blue—The drive firmware is being updated or requires an update.
Removes the uFF drive when released.
•
Off—OK to remove the drive. Removing the drive does not cause a logical
drive to fail.
•
Solid white—Do not remove the drive. Removing the drive causes one or
more of the logical drives to fail.
•
Off—The drive is not configured by a RAID controller or a spare drive.
•
Solid green—The drive is a member of one or more logical drives.
•
Flashing green (4 Hz)—The drive is operating normally and has activity.
•
Flashing green (1 Hz)—The drive is rebuilding, erasing, or performing a
RAID migration, stripe size migration, capacity expansion, logical drive
extension, or spare activation.
•
Flashing amber/green (1 Hz)—The drive is a member of one or more
logical drives that predicts the drive will fail.
•
Solid amber—The drive has failed.
•
Flashing amber (1 Hz)—The drive is not configured and predicts the drive
will fail.
Removes the SFF flash adapter when released.
Component identification
167