Power Supply Specifications - HPE Apollo 4200 Gen10 Maintenance And Service Manual

Specification
With the four-bay LFF rear drive cage option, minimum
With the four-bay LFF rear drive cage option, maximum
48-bay SFF drive models
Without the two- or six-bay rear SFF drive cage option,
minimum
Without the two- or six-bay rear SFF drive cage option,
maximum
With the two-bay SFF rear drive cage option, minimum
With the two-bay SFF rear drive cage option, maximum
With the six-bay SFF NVMe rear drive cage option, minimum
With the six-bay SFF NVMe rear drive cage option, maximum
With the six-bay SFF rear drive cage option (SAS or SATA),
minimum
With the six-bay SFF rear drive cage option (SAS or SATA),
maximum

Power supply specifications

Depending on the installed options and/or the regional location where the system was purchased, the system is configured
with one of the following power supplies:
• HPE 800 W Flex Slot Titanium Hot-plug power supply (PN 866793-001)
• HPE 800 W Flex Slot -48 V DC Hot-plug power supply (PN 866728-001)
• HPE 800 W Flex Slot Universal Hot-plug power supply (PN 866727-001)
• HPE 800 W Flex Slot Platinum Hot-plug Power Supply (PN 866730-001)
• HPE 1600 W Flex Slot Platinum Plus Hot-plug Power Supply (PN 863373-001)
These power supplies are Flexible Slot Power Supply products for ProLiant servers. For more information about the power
supply features, specifications, and compatibility, see the Hewlett Packard Enterprise website (http://www.hpe.com/servers/
powersupplies).
CAUTION: Check the system and power supply input ratings before powering up the system.
Value
23.20 kg (51.15 lb)
40.60 kg (89.51 lb)
—
23.40 kg (51.59 lb)
34.72 kg (76.54 lb)
23.68 kg (52.21 lb)
35.00 kg (77.16 lb)
24.89 kg (54.87 lb)
36.87 kg (81.28 lb)
24.89 kg (54.87 lb)
36.87 kg (81.28 lb)
178
Specifications