Table of Contents
Advertisement
7. Use a flat-headed screwdriver to remove the front I/O board.
To replace the component, reverse the removal procedure.
Removing and replacing the cable management holder
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components
to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.
Prerequisites
Before you perform this procedure, make sure that you have the components included with the hardware kit.
Removal and replacement procedures
115
Advertisement
Table of Contents
