Function Switches (D1 Type) - HONDA marine BF115J Owner's Manual

FUNCTION SWITCHES
(D1 type)
[+] SWITCH
[-] SWITCH
Function switches are used for
operations in the fast idle mode and
trolling mode.
NT (WARM)
Lights: The shift is in neutral.
Blinks: It is in the fast idle mode.
ACT
Lights: The shift and throttle
operations are possible.
Off: The shift and throttle operations
are not possible.
<Fast Idle Mode>
The fast idle mode is only needed for
starting carbureted outboard models.
The BF115J/135D/150D models use
programmed fuel injection so, this
mode will not be needed for starting.
After the engine starts and if the
outside temperature is below
5°C (41°F), the fast idle mode can be
used to accelerate engine warm up.
NEUTRAL
FORWARD
Pull up
REMOTE
CONTROL
LEVER
CONTROLS AND FEATURES
Use the [-] switch and the remote
control lever to adjust the engine
speed without gearshift when
warming up the engine.
Keeping the [-] switch pressed when
the remote control lever is in the
NEUTRAL position, turn the lever
forward. Keep turning the lever
forward. The throttle opens and the
engine speed increases after the lever
passed the shift point.
Note that the gearshift mechanism
does not function when the [-] switch
REVERSE
is pushed once and then released after
the remote control lever is moved.
The control lever does not operate
unless the neutral release lever is
NEUTRAL
pulled.
RELEASE
LEVER To release the fast idle mode, press
and hold the [-] switch.
31