Function Switches (Flush-Mount Type) - HONDA marine BF350A Owner's Manual

Function Switches (Flush-
Mount type)
[-] SWITCH [+] SWITCH
Function switches are used for
operations in the fast idle mode
and trolling mode.
NT (WARM)
Lights: The gearshift is in
●
neutral.
Blinks: It is in the fast idle
●
mode.
ACT
Lights: The gearshift and
●
throttle operations are
possible.
Off: The gearshift and throttle
●
operations are not possible.
Fast Idle Mode
The BF350A model uses
programmed fuel injection, so
this mode will not be needed for
starting.
After the engine starts and if the
outside temperature is below
41°F (5°C), the fast idle mode can
be used to accelerate engine
warm-up.
See page 60 for engine warm-
up instructions.
CONTROLS AND FEATURES
NEUTRAL
FORWARD
Pull up
GEARSHIFT/THROTTLE
CONTROL LEVER
Use the [-] switch and the
gearshift/throttle control lever to
adjust the engine speed without
the gearshift when warming up
the engine.
REVERSE
NEUTRAL
RELEASE
LEVER
27