SERVICING YOUR OUTBOARD MOTOR
SPARK PLUG SERVICE
Standard Spark Plug
(Iridium)
RECOMMENDED SPARK PLUGS:
ILZKAR7S11E (NGK)
NOTICE
• Incorrect spark plugs can
cause engine damage.
Inspection
1. Disconnect the battery
negative (–) terminal.
2. Unlock and remove the
engine cover (P.91).
100
GROMMETS
PROJECTIONS
GROMMET
PROJECTIONS
GROMMET
REAR STRIKER GUIDE COVER
3. Release the grommets on the
rear striker guide cover from
the projections and remove
the rear striker guide cover.
WIRE CONNECTOR
BOLT
IGNITION COIL
4. Remove the bolt from the
ignition coil. Move the
ignition coil to a position that
allows removal of the wire
connector easily.
5. Disconnect the wire connector
from the ignition coil by
pushing on the lock tab and
pulling on the connector. Pull
on the plastic connector, not
the wires.
6. Remove the ignition coil by
pulling it up slightly.