Table of Contents
Advertisement
SERVICING YOUR OUTBOARD MOTOR
Spark Plug Service
<Standard Spark Plug>
RECOMMENDED SPARK PLUGS:
ZFR6K-11 (NGK)
KJ20DR-M11 (DENSO)
Incorrect spark plugs can cause
engine damage.
See page 109 for instructions of
handling the Iridium spark plugs
(optional parts).
1. Disconnect the battery negative (–)
terminal.
2. Unlock and remove the engine
cover (p. 97).
106
SPARK PLUG COVER
3. Remove the two bolts with the 6
mm hex. wrench, and remove the
spark plug cover.
IGNITION COIL
WIRE CONNECTOR
4. Use a 6 mm hex. wrench to remove
the bolt holding the ignition coil.
Move the ignition coil to a position
that allows removal of the wire
connector easily.
5. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
BOLTS
6. Remove the ignition coil by pulling
it up slightly.
Do not strike or drop the ignition coil,
or it may be damaged and require
replacement.
BOLT
Advertisement
Table of Contents
