4. Image Quality Problem: Full Page
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
When Using Transparent Film
White spots appear at the trailing edge when printing is performed on a transparent film.
Cause:
This may occur when toner is compressed and causes blotching at the sides of the paper (transparent
film) during paper transfer.
Occurrence conditions:
• When printing on slippery transparent film
• When printing high image density images in high resolution mode in full color + special toner
(clear) or in full color + special color (white)
Solution:
Position the image 5 mm (0.2 inches) or more away from the edge. Adjust the settings as follows:
1.
Adjust the value for [Adjust image position] in [Manual Adjustment] in [Adjust image
position] on the [Media] hub.
2.
Adjust the image data position.
3.
Use paper with substantial margins.
116
M0EBIC0097