Ricoh Pro C7500 Original Instructions Manual page 117

Solution:
1. Measure the length (in mm) of the area from the trailing edge of the paper where the
print is faint.
2. If the paper is not registered as custom paper, register the brand of the paper.
3. In [Detailed settings] for the custom paper you are using, select 1216: [Paper Transfer
Output Correction: Paper Edge], and then adjust the values in the following settings to
"area where the print is faint + 10 mm" according to the mode in use.
• 1216-05: Paper Transfer Output Correction: Paper Edge: BW: Trailing Edge Length
• 1216-10: Paper Transfer Output Correction: Paper Edge: FC/FCS: Trailing Edge Length
• 1216-27: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge Length: Clear/
Special
• 1216-28: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge Length: White
• 1216-29: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge Length: Metallic
4. Select 1216: [Paper Transfer Output Correction: Paper Edge].
• 1216-03: Paper Transfer Output Correction: Paper Edge: BW: Trailing Edge
• 1216-08: Paper Transfer Output Correction: Paper Edge: FC/FCS: Trailing Edge
• 1216-19: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge: Clear/Special
• 1216-20: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge: White
• 1216-21: Paper Transfer Output Correction: Paper Edge: S: Trailing Edge: Metallic
Print images with the following two settings.
• Setting 1: Present value +1
• Setting 2: Present value -1
5. Check to see if the white spots have disappeared.
If the white spots have disappeared with either Setting 1 (present value +1) or Setting 2 (present
value -1), this procedure is complete.
If the white spots have not disappeared but reduced, go to the next step.
6. If improvement is observed by Setting 1 (increasing the value by one step), increase the
value by one more step. If improvement is observed by Setting 2 (decreasing the value by
one step), decrease the value by one more step.
7. Print the image and check to see if the white spots have disappeared.
Yes Finished!
No Repeat Steps 6.
If the problem persists or is not reduced, there is no other solution.
Unprinted
115