10. Troubles Related to Paper Feeding and Delivery (Vacuum Feed LCIT RT5150)
For details, see page 279 "Attaching the Side Fences, Auxiliary Side Fence, and End Fence (for
Long Paper)".
7.
To feed paper from Extension output banner sheet tray, attach the side fences and end
fence for extra-long paper.
For details, see page 279 "Attaching the Side Fences, Auxiliary Side Fence, and End Fence (for
Long Paper)".
Otherwise, go to the next step.
8.
Check if the paper misfeed is resolved.
Yes
No
9.
In [Detailed settings] for custom paper, select 1301: [2-Tray LCIT: Paper Feed Mode] and
set [Paper Feed Mode:Fan Level] to [Prevent Non Feed (Stronger Blow)].
10.
Check if the paper misfeed is resolved.
Yes
No
11.
In [Detailed settings] for custom paper, select 1301: [2-Tray LCIT: Paper Feed Mode] and
set [Paper Feed Mode:Fan Level] to [Prevent Non Feed (Strongest Blow)].
12.
Check if the paper misfeed is resolved.
Yes
No
13.
In [Detailed settings] for custom paper, set 1303-04: [Tray Elevation Assist] [Assist Mode]
from "Off" to "On".
If the paper misfeed occurred just before running out of paper, change the setting from "0" to "1".
Otherwise, change the setting from "0" to "2".
14.
Check if the paper misfeed is resolved.
Yes
No
272
Finished!
Go to the next step.
Finished!
Go to the next step.
Finished!
Go to the next step.
Finished!
Go to the next step.