Paper Misfeeds (J430, 431, 445, 446, 460, 461) - Ricoh Pro C7500 Original Instructions Manual

10. Troubles Related to Paper Feeding and Delivery (Vacuum Feed LCIT RT5150)
No
• If the double feeding still persists after performing the above procedure, do as follows.
• If paper misfeeds persist even after performing the abovementioned procedure, enable 307:
[Auto Continue Paper Feeding] in [Operator Adjust.] in order to resolve the problem of
reduced operation rate due to paper jam detection.
• Double feeding may be erroneously detected when printing on thin paper with a narrow
width. Select 1331-03: [Detect JAM080] in [Detailed settings] for custom paper, and then set
it to "Off".

Paper Misfeeds (J430, 431, 445, 446, 460, 461)

Cause:
The cause may vary depending on the paper and operating environment.
Solution
1. Perform the common troubleshooting procedure.
For details, see page 267 "Common Troubleshooting".
2. Check if the paper misfeed is resolved.
Yes
No
3. With the paper with a width of 182 mm to 225 mm (7.2 inches to 8.9 inches), attach the
small tab end fence.
For details, see page 279 "Attaching the Small Tab End Fence to the Wide Large Capacity Tray".
Otherwise, go to the next step.
270
There is no other solution, so do not feed paper.
Finished!
Go to the next step.