J080 Appears - Ricoh Pro C7500 Original Instructions Manual

[1]
[2]
[1] [2]
[E] [D]
• The lines perpendicular to the mark [A] may be printed. The lines parallel to it cannot be printed.
• [B]: Printable
• [C]: Not printable
• [D]: Space of 2 mm or more from the line
• [E]: Line thickness of 0.2 mm or less.

J080 Appears

Cause:
The paper delivery is delayed and the position correction for the sub-scan registration fails to be
performed correctly, resulting in J080.
Occurrence conditions:
This is prone to occur when slippery paper or thick, stiff paper is used.
Solution:
In [Detailed settings] for the custom paper you are using, select 1331: [Jam Detection], and then change
[Detect JAM080] in [JAM047/080/097/098/099] to [Off].
• When you set 01: [Detect JAM080] in [JAM047/080/097/098/099] to [Off], the printed
image may become misaligned at the leading edge.
[1]
[A]
[C]
[2]
[B]
M0EBIC0116
Paper Jam
257