Rippling, Uneven Streaks, Or White Spots (Caused By Condensation) - Ricoh Pro C7500 Original Instructions Manual

Rippling, Uneven Streaks, or White Spots (Caused by Condensation)

Waves, irregular lines
Voids
Cause:
At the upper frame of the heat pipe and the scanning part of the detection unit, steam from the paper
adheres to the low-temperature part as condensation. The condensation turns to water droplets, which
fall on or adhere to the paper.
If condensation adheres after fusing, rippling or uneven streaks occur. (White spots do not occur.)
If condensation adheres before paper transfer, it causes a transfer error, resulting in white spots.
Occurrence conditions:
• When printing in low temperatures.
• When printing in high humidity (such as rainy days or days before/after rain).
• When storing paper in high humidity.
DXT853
DXT854
Unprinted
123