Ricoh Pro C7500 Original Instructions Manual page 276

10. Troubles Related to Paper Feeding and Delivery (Vacuum Feed LCIT RT5150)
Solution:
1. Perform the common troubleshooting procedure.
For details, see page 267 "Common Troubleshooting".
2. Check if the skew is resolved.
Yes
No
3. If using paper with a thickness of Paper Weight 5 or below, extend the paper retainer.
If using paper with a thickness of Paper Weight 6 or above, go to the next step.
4. To feed paper from Vacuum Feed Banner Sheet Tray Type S9, attach the end fence for
long paper.
For details, see page 279 "Attaching the Side Fences, Auxiliary Side Fence, and End Fence (for
Long Paper)".
• For paper with a length of 420.0 mm to 559.9 mm (16.5 inches to 22.0 inches), attach the 2
short end fences.
• For paper with a length of 560.0 mm to 700.0 mm (22.0 inches to 27.6 inches), attach the 1
long end fence.
5. If feeding paper from the paper feed tray, attach the tab sheet holder and small tab end
fence.
For paper width of 297 mm (11.7 inches) or above, attach the tab sheet holder. For details, see
page 279 "Attaching the Tab Fence in the Wide Large Capacity Tray".
For paper width below 297 mm (11.7 inches), attach the small tab end fence. For details, see
page 279 "Attaching the Small Tab End Fence to the Wide Large Capacity Tray".
274
Finished!
Go to the next step.
M0EDIC1386