Glossy Lines At The Edge Of The Paper - Ricoh Pro C7500 Original Instructions Manual

5. Image Quality Problem: Lines/Streaks
No
4. Increase the line speed of the transfer timing roller by 0.1%.
5. Print the image. Has the problem been resolved?
Yes
No
• Increasing the speed of the transfer timing roller may cause a change in density in the area 90 mm
(3.6 inches) from the trailing edge of the paper.

Glossy Lines at the Edge of the Paper

A glossy line appears in parallel to the paper feed direction. This may occur on solid-fill images.
Cause:
Due to edge roughness on the paper, the toner on the fusing belt surface fluctuates parallel to the paper
feed direction, causing glossy streaks on solid-fill images and uneven density on halftone images.
This problem is prone to occur on synthetic paper and coated paper with a medium thickness or more.
Solution:
1. In the [Machine: Maintenance] group on the [Operator Adjust.] menu, select 0508:
[Manually Smooth Fusing Belt], and then execute 01: [Belt Scratches].
166
Go to the next step.
Finished!
Start over from Step 4.
DFP455