Table of Contents
Advertisement
• FQXSFIO0024M: An error has been detected by the IEH on processor [arg1]. The type of IEH is
[arg2]. The index of the IEH is [arg3]. The value of IehErrorStatus register is [arg4]. Please check
error logs for additional downstream device error data.
Severity: Error
Parameters:
[arg1]: Processor number, 1 - based [arg2]: IEH type [arg3]: IEH index [arg4]: IehErrorStatus register value
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or firmware update for the system or
adapter that applies to this error.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFIO0025I: An error has been detected by the IIO on processor [arg1]. The index of the IIO
stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional
downstream device error data.
Severity: Warning
Parameters:
[arg1]: Processor number, 1 - based [arg2]: IIO stack index [arg3]: VTD error / CBDMA error / M2PCIE
error / IRP error / Ring error / ITC error /OTC error
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or firmware update for the system or
adapter that applies to this error.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFIO0025M: An error has been detected by the IIO on processor [arg1]. The index of the IIO
stack is [arg2]. The type of IIO Internal Error is [arg3]. Please check error logs for additional
downstream device error data.
Severity: Error
Parameters:
[arg1]: Processor number, 1 - based [arg2]: IIO stack index [arg3]: VTD error / CBDMA error / M2PCIE
error / IRP error / Ring error / ITC error /OTC error
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or firmware update for the system or
adapter that applies to this error.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFIO0035M: An Uncorrectable PCIe Error has Occurred at Segment 0x[arg1] Bus 0x[arg2]
Device 0x[arg3] Function 0x[arg4]. The Vendor ID for the device is 0x[arg5] and the Device ID is 0x
[arg6]. The physical [arg7] number is [arg8].
Severity: Error
Parameters:
[arg1]: Segment [arg2]: Bus [arg3]: Device [arg4]: Function [arg5]: VID [arg6]: DID [arg7]: Slot/Bay [arg8]:
Instance number
.
171
Chapter 3
UEFI events
Advertisement
Table of Contents
