Lenovo ThinkSystem SD650-N Manual page 161

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFMA0048M DIMM [arg1] disabled due to PMIC failure during POST, DIMM
identifier is [arg2].
FQXSFMA0049M DIMM [arg1] disabled due to memory module power failure. DIMM
[arg2] detected and good, DIMM [arg3] not detected.
FQXSFMA0050G DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel
[arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5].
FQXSFMA0053G An uncorrected memory error has been recovered by mirror on DIMM
[arg1] at address [arg2].[arg3]
FQXSFMA0053M DIMM [arg1] not defective but disabled due to unsupported memory
module combination on CPU [arg2].
FQXSFMA0054G Mirror failover operation was successful. DIMM [arg1] has failed over
to the mirrored DIMM [arg2].[arg3]
FQXSFMA0055G Mirror failover operation was unsuccessful. DIMM [arg1] cannot fail
over again.[arg2]
FQXSFMA0057G Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address
[arg2].[arg3] [arg4]
FQXSFMA0058K Near memory/far memory ratio (1:[arg1].[arg2]) for CPU high
bandwidth memory cache mode configuration is not in recommended
range (1:[arg3] - 1:[arg4]).
FQXSFMA0064M DIMM [arg1] disabled due to memory module power failure. DIMM
[arg2] detected and good.
FQXSFMA0067G Errors per row counter threshold limit exceeded on DIMM [arg1] sub-
channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for
DIMM Self-healing to attempt post package repair (PPR), DIMM
identifier is [arg5].
FQXSFMA0067M High bandwidth memory attempt post package repair (PPR) failed at
CPU [arg1] high bandwidth memory channel [arg2] pseudo-channel
[arg3].
FQXSFMA0068G Multi-bit CE occurred on CPU [arg1] high bandwidth memory channel
[arg2] pseudo-channel [arg3] different rows.
FQXSFMA0068M High bandwidth memory attempt post package repair (PPR)
exceeded threshold at CPU [arg1] high bandwidth memory channel
[arg2] pseudo-channel [arg3].
FQXSFMA0069G Page retire PFA threshold limit exceeded on high bandwidth memory
CPU[arg1] at address [arg2]. [arg3]
FQXSFMA0070G Post package repair failure and Bank sparing occurred during POST
on CPU [arg1] high bandwidth memory channel [arg2] pseudo-
channel [arg3].
FQXSFMA0072M CPU [arg1] high bandwidth memory channel [arg2] disabled due to
population error.
FQXSFMA0075G Multi-bit CE occurred on CPU [arg1] high bandwidth memory channel
[arg2] pseudo-channel [arg3], need to restart the system for high
bandwidth memory self-healing to attempt post package repair (PPR).
FQXSFPU0022G The TPM configuration is not locked.
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
. 157
Chapter 3 UEFI events