Lenovo ThinkSystem SD650-N Manual page 158

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFIO0021I PCIe DPC software triggering occurred in physical [arg1] number
[arg2].
FQXSFMA0001I DIMM [arg1] Disable has been recovered. [arg2]
FQXSFMA0002I The uncorrectable memory error state has been cleared.
FQXSFMA0006I [arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].
FQXSFMA0007I [arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0009I Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
FQXSFMA0010I Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
FQXSFMA0011I Memory population change detected. [arg1]
FQXSFMA0012I The PFA of DIMM [arg1] has been deasserted.
FQXSFMA0014I Memory spare copy initiated. [arg1]
FQXSFMA0015I Memory spare copy has completed successfully. [arg1]
FQXSFMA0026I DIMM [arg1] Self-healing, attempt post package repair (PPR)
succeeded at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on
Device [arg6]. [arg7]
FQXSFMA0027I Invalid memory configuration (unsupported DIMM Population)
recovered.
FQXSFMA0029I The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
FQXSFMA0052I DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
FQXSFMA0053I DIMM [arg1] re-enabled due to memory module combination
updating.
FQXSFMA0058I Memory mode is in flat mode, near memory/far memory ratio issue
has recovered.
FQXSFMA0059I Bank sparing performed on CPU [arg1] high bandwidth memory
channel [arg2] pseudo-channel [arg3].
FQXSFMA0060I Partial cache line sparing performed on CPU [arg1] high bandwidth
memory channel [arg2] pseudo-channel [arg3].
FQXSFMA0063I A correctable memory error handled by ADDDC on DIMM [arg1].
DIMM identifier is [arg2].
FQXSFMA0065I Multi-bit CE of DIMM [arg1] has been deasserted after performing
post package repair. DIMM identifier is [arg2].
FQXSFMA0066I High bandwidth memory attempt post package repair (PPR)
succeeded at CPU [arg1] high bandwidth memory channel [arg2]
pseudo-channel [arg3].
FQXSFPU0020I The UEFI firmware image capsule signature is invalid.
154
ThinkSystem SD650-N V3 Neptune DWC Tray and DW612S Neptune DWC Enclosure Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational