Table of Contents
Advertisement
• FQXSPSE4072I: Random SED AK is regenerated by user [arg1] from [arg2] at IP address [arg3].
A user regenerates a random SED AK
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0294
User Action:
Information only; no action is required.
• FQXSPSE4073I: Motion detection is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Motion detection is enabled or disabled by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0295
User Action:
Information only; no action is required.
• FQXSPSE4074I: Security mode downgrades because the XCC2 Platinum Upgrade key is expired or
deleted.
This message is for the use case where security mode downgrades because XCC2 Platinum Upgrade key
is expired or deleted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0300
User Action:
Information only; no action is required.
• FQXSPSE4075I: [arg1] by KCS to allow secure boot to be enabled by user [arg2] from [arg3] at IP
address [arg4].
Allow Secure boot to be enabled over KCS
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0310
User Action:
Information only; no action is required.
.
Chapter 2
XClarity Controller events
133
Advertisement
Table of Contents
