Lenovo ThinkSystem SD650-N Manual page 193

Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket. [arg3]: DIMM Silklabel 1, Silklabel 2; (All
DIMMs on the failed channel)
User Action:
Complete the following steps:
1. Power off the system and remove A/C power.
2. Reseat the DIMMs specified by the event message.
3. Restore A/C power and power on the system.
4. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0067G: Errors per row counter threshold limit exceeded on DIMM [arg1] sub-channel
[arg2] Rank [arg3] DRAM [arg4], need to restart the system for DIMM Self-healing to attempt post
package repair (PPR), DIMM identifier is [arg5].
Severity: Warning
Parameters:
[arg1]: DIMM Silk Label [arg2]: Sub Channel [arg3]: Rank number [arg5]: DIMM info (S/N, FRU and UDI.), e.
g. "739E68ED-VC10 FRU 0123456"
User Action:
Complete the following steps:
1. Restart the system to allow for DIMM Self-healing to attempt hard post package repair (PPR) and
confirm that event ID FQXSFMA0026I was recorded.
2. Run advance memory test using the XClarity Provisioning Manager. Click Diagnostics > Run
Diagnostics > Memory Test > Advanced Memory Test to repair the DIMM.
3. If the problem persists or if PPR attempt failed due to event ID FQXSFMA0027M or
FQXSFMA0028M, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0067M: High bandwidth memory attempt post package repair (PPR) failed at CPU [arg1]
high bandwidth memory channel [arg2] pseudo-channel [arg3].
Severity: Warning
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket. [arg3]: Pseudo channel
User Action:
Complete the following steps:
1. Power off the system and remove A/C power.
2. Restore A/C power and power on the system.
3. Reset UEFI to factory default settings.
4. Update UEFI firmware to the latest version.
5. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0068G: Multi-bit CE occurred on CPU [arg1] high bandwidth memory channel [arg2]
pseudo-channel [arg3] different rows.
Severity: Warning
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket [arg3]: Pseudo channel
. 189
Chapter 3 UEFI events