Table of Contents
Advertisement
backplane failure has detected
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: IMM CIM ID: 0320
User Action:
Information only; no action is required.
• FQXSPEM4044I: Dust filter measurement was successfully completed, no action is needed.
Alert the user when dust filter measurement is completed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0321
User Action:
Information only; no action is required.
• FQXSPFC4000I: The bare metal connection process has been started.
Bare Metal Connection process has been started
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0143
User Action:
Information only; no action is required.
• FQXSPFC4001I: The bare metal update application reports a status of [arg1].
Bare Metal Update Application Status
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0144
User Action:
Information only; no action is required.
• FQXSPFC4002I: System running in setup.
System running in setup
Severity: Info
Serviceable: No
52
ThinkSystem SD650-N V3 Neptune DWC Tray and DW612S Neptune DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
