Lenovo ThinkSystem SD650-N Manual page 33

Neptune dwc tray and neptune dwc enclosure
Table of Contents

Advertisement

• FQXSPBR4007I: Management Controller [arg1]: Configuration restoration from a file by user [arg2]
failed to complete from [arg3] at IP address [arg4].
This message is for the use case where a user restores a Management Controller configuration from a file
and the restoration fails to complete.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0137
User Action:
Complete the following steps until the problem is solved:
1. Retry the operation.
2. AC cycle the system.
3. If Problem persists, collect Service Data log.
4. Contact Lenovo Support.
• FQXSPBR4008I: Management Controller [arg1]: Configuration restoration from a file by user [arg2]
failed to start from [arg3] at IP address [arg4].
This message is for the use case where a user restores a Management Controller configuration from a file
and the restoration fails to start.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0138
User Action:
Complete the following steps until the problem is solved:
1. Check if password for encrypted backup config file is correct.
2. Retry the operation.
3. AC cycle the system.
4. If problem persists, collect Service Data log.
5. Contact Lenovo Support.
• FQXSPBR4009I: Management Controller [arg1]: cloning configuration from neighbor server [arg2]
by group name [arg3].
This message is for the use case where a user synchronizes a Management Controller configuration by
Federation.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0255
User Action:
.
Chapter 2
XClarity Controller events
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem dw612s7d7n

Table of Contents