Lenovo ThinkSystem SD650-N Manual page 191

• FQXSFMA0060I: Partial cache line sparing performed on CPU [arg1] high bandwidth memory
channel [arg2] pseudo-channel [arg3].
Severity: Info
Parameters:
[arg1]: CPU number, 1 - based (silk label #) [arg2]: Channel number, 0 – based number at socket level
[arg3]: Pseudo-channel number, 0 – based at channel level
User Action:
Information only; no action is required.
• FQXSFMA0061M: An uncorrected recoverable memory error occurred on CPU [arg1] high
bandwidth memory channel [arg2] pseudo-channel [arg3].
Severity: Error
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket. [arg3]: Pseudo channel.
User Action:
Complete the following steps:
1. Power off the system and remove A/C power.
2. Restore A/C power and power on the system.
3. Reset UEFI to factory default settings.
4. If the problem persists, collect Service Data logs, and contact Lenovo Support.
• FQXSFMA0062M: An uncorrectable memory error occurred on CPU [arg1] high bandwidth memory
channel [arg2] pseudo-channel [arg3].
Severity: Error
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket. [arg3]: Pseudo channel.
User Action:
Complete the following steps:
1. Power off the system and remove A/C power.
2. Restore A/C power and power on the system.
3. Reset UEFI to factory default settings.
4. If the problem persists, collect Service Data logs, and contact Lenovo Support
• FQXSFMA0063I: A correctable memory error handled by ADDDC on DIMM [arg1]. DIMM identifier
is [arg2].
Severity: Info
Parameters:
[arg1]: Dimm Silk Label [arg2]: DIMM info (S/N, FRU and UDI.), e.g. "739E68ED-VC10 FRU 0123456"
User Action:
Information only; no action is required.
• FQXSFMA0064M: DIMM [arg1] disabled due to memory module power failure. DIMM [arg2]
detected and good.
Severity: Warning
. 187
Chapter 3 UEFI events