Table of Contents
Advertisement
Severity: Error
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket [arg3]: Pseudo channel
User Action:
Complete the following steps:
1. Reboot System.
2. If the problem persists, check the Lenovo support site for an applicable service bulletin or firmware
update for the system that applies to this error.
3. If the problem persists, collect Service Data logs, and contact Lenovo Support.
• FQXSFMA0072M: CPU [arg1] high bandwidth memory channel [arg2] disabled due to population
error.
Severity: Warning
Parameters:
[arg1]: Socket number, 1-based. [arg2]: channel on socket, 0-based.
User Action:
Complete the following steps:
1. Reboot System.
2. If the problem persists, check the Lenovo support site for an applicable service bulletin or firmware
update for the system that applies to this error.
3. If the problem persists, collect Service Data logs, and contact Lenovo Support.
• FQXSFMA0073M: High bandwidth memory built-in self-test failed on CPU [arg1].
Severity: Error
Parameters:
[arg1]: Socket number, 1-based.
User Action:
Complete the following steps:
1. Reboot System.
2. If the problem persists, check the Lenovo support site for an applicable service bulletin or firmware
update for the system that applies to this error.
3. If the problem persists, collect Service Data logs, and contact Lenovo Support.
• FQXSFMA0074M: High bandwidth memory training failed on CPU [arg1].
Severity: Error
Parameters:
[arg1]: Socket number, 1-based.
User Action:
Complete the following steps:
1. Reboot System.
2. If the problem persists, check the Lenovo support site for an applicable service bulletin or firmware
update for the system that applies to this error.
.
191
Chapter 3
UEFI events
Advertisement
Table of Contents
