Table of Contents
Advertisement
• FQXSPEM4039I: Attempting to perform an immediate dust filter measurement on server [arg1] by
user [arg2] from [arg3] at IP address [arg4].
Attempting to perform an immediate dust filter measurement
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0308
User Action:
Information only; no action is required.
• FQXSPEM4040I: Dust filter measurement is completed. The airflow pathway is obstructed, check
and replace the dust filter, or remove any obstructing object.
Alert the user when dust filter measurement fails
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0309
User Action:
Information only; no action is required.
• FQXSPEM4041I: The SmartNIC in slot [arg1] encountered boot timeout.
SmartNIC in a certain slot encountered boot timeout
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0312
User Action:
Information only; no action is required.
• FQXSPEM4042I: The SmartNIC in slot [arg1] went through a crash dump.
SmartNIC in a certain slot went through a crash dump
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0313
User Action:
Information only; no action is required.
• FQXSPEM4043I: A [arg1] failure has been detected and need [arg2] to recover.
.
Chapter 2
XClarity Controller events
51
Advertisement
Table of Contents
