Table of Contents
Advertisement
User Action:
Complete the following steps until the problem is solved:
1. Check if the OS watchdog is enabled
2. Check if the crash video recording is enabled
3. If problem persists, collect Service Data log.
4. Contact Lenovo Support.
• FQXSPOS4011I: OS failure screen capture with hardware error is [arg1] by user [arg2] from [arg3]
at IP address [arg4].
OS failure screen capture with hardware error is enabled or disabled by user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0280
User Action:
Information only; no action is required.
• FQXSPOS4012I: POST watchdog Screen Capture Occurred.
This message is for the use case where an operating system error has occurred and the screen was
captured.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0302
User Action:
Information only; no action is required.
• FQXSPPP4000I: Attempting to [arg1] server [arg2] by user [arg3].
This message is for the use case where a user is using the Management Controller to perform a power
function on the system.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0015
User Action:
Information only; no action is required.
• FQXSPPP4001I: Server Power Off Delay set to [arg1] by user [arg2].
A user configured the Server Power Off Delay
Severity: Info
.
Chapter 2
XClarity Controller events
83
Advertisement
Table of Contents
