Table of Contents
Advertisement
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0816
User Action:
Complete the following steps:
1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to
this error.
2. Reboot system.
3. If problem persists, collect Service Data log.
4. Contact Lenovo Support.
• FQXSPPU0012M: [ProcessorElementName] has machine check error.
This message is for the use case when an implementation has detected a Processor that has encountered
a machine check error.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0058
User Action:
Re-seat the processor (trained technician only). If the error still occurrs, replace the processor with a new
one (trained technician only).
• FQXSPPU0013G: [ProcessorElementName] has correctable error.
This message is for the use case when an implementation has detected a Processor has correctable error.
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - CPU
SNMP Trap ID: 42
CIM Prefix: PLAT CIM ID: 0059
User Action:
Complete the following steps:
1. If the DIMM configuration was changed prior to this failure, verify that the DIMMs are installed in the
correct population sequence.
2. RESEAT the DIMM that failed POST memory test and the DIMMs on adjacent slots if populated. Boot
to F1 setup and enable the DIMM. Reboot the system.
3. If the DIMMs have been upgraded just prior to the issue than update uEFI to the latest version.
4. If the problem persists, collect Service Data logs.
5. Contact Lenovo Support.
• FQXSPPU2001I: An Over-Temperature Condition has been removed on [ProcessorElementName].
.
Chapter 2
XClarity Controller events
99
Advertisement
Table of Contents
