Automatic Shutdown - Tele Radio TG-T12-20 Installation Instructions Manual

Industrial radio remote controls
Table of Contents

Advertisement

Logout from menu mode
 
1. Make sure that the stop button is pressed.
 
2. Pull out the stop button.
 
3. Press side button 3. Keep pressed.
 
4. Press the stop button.
 
5. Release side button 3.
 
6. Go to [Logout].
 
7. Select by pressing side button 4.
 
8. Select a receiver to log out from.
 
9. Confirm by pressing side button 4.
The display shows [Logging out...] while the process is ongoing.
If logout fails, the display shows [FAILED]. The transmitter turns off.
If logout succeeds, the display shows [OK]. The transmitter turns off after logging out.
 
 
 
AUTOMATIC SHUTDOWN
 
Turning on automatic shutdown can save battery capacity by automatically turning the transmitter off
when no function has been activated for a set time.
 
Set the time for automatic shutdown
 
1. Make sure that the stop button is pressed.
 
2. Pull out the stop button.
 
3. Press side button 3. Keep pressed.
 
4. Press the stop button.
 
5. Release side button 3.
 
6. Go to [Auto Shutdown].
 
7. Select the time that you want for automatic shutdown: 0-255 minutes. If you want to turn off
automatic shutdown, select 0.
 
8. Confirm by pressing side button 4.
- 54 -

Advertisement

Table of Contents
loading

Table of Contents