Frequencies & Channels - Tele Radio TG-T12-20 Installation Instructions Manual

FREQUENCIES & CHANNELS
NOTE! If your system is transmitting on the frequency bands 433MHz eller 2.4 GHz, the receiver will
automatically detect and switch to the same channel that the transmitter is using. If your system is
transmitting the 915 MHz frequency band, you have to switch bank in the receiver by using the PC
program Settings manager. Contact your representative for assistance.
Switch channel or bank on the transmitter
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
3. Press side button 3. Keep pressed.
4. Press the stop button.
5. Release side button 3.
6. Go to [Channel] or [Bank].
7. Refer to the frequency table section. Select a channel/bank by pressing side button 4.
8. Confirm by pressing side button 4.
9. Press side button 3 to exit the menu. The transmitter turns off.
- 55 -