CHANGE BATTERIES
1. Remove the (a) clip (2 screws).
2. Remove the (b ) battery lid (2 screws).
3. Put the batteries in (3 x 1.5V AA batteries).
4. Put the battery lid (b) back (2 screws).
5. Put the clip (a) back (2 screws).
START THE TRANSMITTER
1. Press the ON button for at least 1 second until the red LED lights.
The red LED flashes when the transmitter is on.
TURN THE TRANSMITTER OFF
1. Press the OFF button.
The red LED goes out.
AUTOMATIC SHUTDOWN
When no buttons have been pressed for 3 minutes, the transmitter turns off.
- 9 -